Aluminium Alloy Outdoor Laser Christmas Lights with IR Wireless Remote by 1byone – Review
Living in New England means that setting up holiday lights and decorations can either be a freezing cold activity or it might be one you try to hurry through to get it done and hope it doesn’t snow too much!
1byone offers an outdoor laser Christmas light that includes a remote, you can can set up the holiday decorations in one moment without having to worry about frozen fingers or the fact that you might stand in several feet of snow to take them down at the end of December. Inside the books is a laser light whcih includes (red, green and an alternating red/green) laser light, as well as a bracket to place it in the ground and a power adapter. You stick the spike inside the ground after attaching it to the laser light connect the power and in less than five minutes the laser light show is ready to go. The best part – in my opinion is that you can also control it from inside and use a timer to make it automatically come on and turn off as well as change the colors with just a touch of the remote.
I really liked how quick and easy it was to set up outside and put into my lawn. I also liked that it was controlled via remote control and that I could use a grounded electrical cord to provide power to the laser light. I will say that I have installed and taken it out a few times when I knew it was going to rain (even though I didn’t have to) just because I wanted to test out all the different settings. The projector is waterproof and can be used both inside and outside – so perhaps you could have Christmas in July if you wished! I also liked that it doesn’t use too much electricity. I also really liked the automatic function which meant that the unit would automatically turn off in bright light/sunshine or turn on in the dark.
In terms of enhancements, I wish there was a short memory that allowed the unit to remember what you did if you have to unplug it. Currently, if you unplug it you have to start over again in the programming process.
Overall, I am looking forward to setting this up outside my house around Thanksgiving during the holiday season to have holiday lights on. It will be fast and easy to set up and since I’ve already tested it out quite a bit it won’t be bad to get the settings right and the holiday mood fast. Perfect for the busy family or someone who might live in a climate where the weather isn’t always predictable!
Power Input: AC 120V 60Hz
Power Output: DC 5V 2000mA
Dimension: max. diameter 4.45in x length 4.58in
IP Protection: IP65 for the light casing and IP44 for power adapter.
Materials: Aluminum alloy casing and spike. Tempered glass lens.
Spike Height: 7.79in
Working Temperature: -35℃ (-31℉) to 35℃ (95℉)
Remote Control Distance: 30ft
Coverage: 3.5ft 57-85 sqft; 10ft 265-325.6 sqft; 15ft 776.8-971.44 sqft; 20ft 1240-1550.00 sqft; 25ft 1687.2- 2109.72 sqft
1 x Laser Light with Power Cable
1 x Screw
1 x Spike
1 x Bracket
1 x Power Adapter
1 x User Manual
1 x IR Remote Controller (with CR2025 battery)
Available from Amazon
NOTE: A product was supplied by the company for review purposes, no other form of compensation was received, all opinions stated in the review are those of the author and have been offered honestly.Powered by Sidelines